Magnum Dimensions ME-BMK Скачать руководство пользователя страница 2

Страница: 2 / 21

hank you from all of us at Sensata Technologies for purchasing

the ME-BMK/ME-BMK-NS battery monitor kit. The BMK/BMK-NS

is a product under the Magnum-Dimensions brand from Sensata

Technologies. We understand there are many purchasing options

in the marketplace, and are pleased that you have decided on a

Magnum-Dimensions product. This product was proudly assembled

and tested in the United States.
We are committed to providing quality products and services. We

hope your experience with us is pleasant and professional.

Disclaimer of Liability

The use of this manual and the conditions or methods of installation,

operation, use, and maintenance of the battery monitor kit are

beyond the control of Sensata Technologies. Therefore, this company

does not assume responsibility and expressly disclaims liability for

loss, damage, or expense whether direct, indirect, consequential or

incidental that may arise out of or be in any way connected with such

installation, operation, use, or maintenance.
Due to continuous improvements and product updates, the images

shown in this manual may not exactly match the unit purchased.

Restrictions on Use

The ME-BMK/ME-BMK-NS battery monitor may only be used in life

support devices and systems with the express written approval of

Sensata Technologies. Failure of this product can reasonably be

expected to cause failure of that life support device or system, or to

affect the safety or effectiveness of that device or system.

Copyright Notice

Permission to copy, distribute, and/or modify this document is

prohibited without written permission from Sensata.

Document Information

Description – ME-BMK/ME-BMK-NS Owner’s Manual
Part Number and Revision – 64-0013 Rev B
Date Published – February 2016
This entire manual is available for download—with many of

the installation diagrams available in color—on our website at:

www.Magnum-Dimensions.com/

Contact Information (for Magnum-branded products)

Sensata Technologies
2211 West Casino Rd.
Everett, WA 98204
Phone: (425) 353-8833 / Fax: (425) 353-8390
Web:

www.Magnum-Dimensions.com/

Содержание ME-BMK






















Результаты поиска

Содержание ME-BMK

Отзывы:

Похожие инструкции для ME-BMK

Бренды по названию

Популярные бренды

Magnum Dimensions ME-BMK, Руководство пользователя

Результаты поиска

Содержание ME-BMK

Отзывы:

Похожие инструкции для ME-BMK

Бренды по названию

Популярные бренды