© 2016 Sensata Technologies
8
Installation
2.2.3 Connecting Multiple Network Devices
If you are using more than one Magnum networked device, use the
supplied 4-wire phone-splitter to connect the devices to the inverter.
There are two interconnection options: Star or Daisy Chain.
Info:
Before deciding on which con
fi
guration to use, review the
differences in installation and ease of troubleshooting.
• Star
Confi guration
– In this arrangement, all network devices
connect to the inverter’s network port
*
via a phone-splitter,
using individual cable runs (Figure 2-4). As each device is
independently connected to the inverter’s network port,
problems in a cable or in a device can be easily isolated—if
there is a cable failure to one device it does not bring down all
the other devices.
* Note – The MM/MMS Series use the Remote (blue) port as the network
port. Do not plug a network device in to the Accessory (yellow) port.
Remote Control
(ME-RC50, ME-ARC50)
ME-AGS-N
Magnum Inverter/Charger
Phone-splitter
Inverting
DC 12.6V 5A
SE LECT
T EC H
A G S
ME T ER
S ET U P
S H O R E
IN V E R T ER
C H A R G E R
INV
CH G
FAU LT
PWR
ON/OF F
ON/OF F
ME-BMK
Small Magnum inverters
Remote Control
(ME-RC50 or ME-ARC50)
ME-BMK
ME-AGS-N
Three-way
Phone-splitter
REMOTE
Inverting
DC 12.6V 5A
SE LECT
T EC H
A G S
ME T ER
S ET U P
S H O R E
IN V E R T ER
C H A R G E R
INV
CH G
FAU LT
PWR
ON/OF F
ON/OF F
Figure 2-4, Multiple Network Devices – Star Confi guration
