7
58-610 Model R82 Radar Transmitter
Ground
Launcher
Adjustment
(+
)
(-)
1.4
QuickStart Configuration
The Radar transmitter comes factory-calibrated and can be
configured in minutes for specific applications. Bench con-
figuration provides a convenient and efficient way to set up
the transmitter before going to the tank site to complete the
installation. The minimum configuration instructions fol-
low. Use the information from the operating parameters
table before beginning configuration. See Configuration
Information, Section 1.1.2.
1. Power-up the transmitter.
During normal operation the display changes every 2 sec-
onds to show one of the various measured values that can be
chosen for display: Level, Volume, Distance, Echo Strength,
%Output, Loop Current and Local Tag.
2. Remove the cover of the electronic compartment.
3. The push buttons offer multiple forms of functionality for
menu navigation and data entry. (See Section 2.6.3 for
complete explanation)
UP arrow moves up through menu or increases
displayed value
DOWN arrow moves down through menu or decreases
displayed value
BACK arrow exits a branch of the menu or exits with-
out accepting entered value
ENTER arrow enters a branch of the menu or accepts
entered value
If a PASSWORD is requested, enter it now. The Default=0
(no password necessary).
Figure 4
Figure 5
