Magnetrol R82 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 64

background image

BULLETIN:  58-610.8
EFFECTIVE:  August 2016
SUPERSEDES:  July 2015

705 Enterprise Street • Aurora, Illinois 60504-8149 • 630-969-4000
[email protected] • www.magnetrol.com

Copyright © 2017 Magnetrol International, Incorporated

Service Policy

Owners  of  MAGNETROL may  request  the  return  of  a
control or any part of a control for complete rebuilding or
replacement. They  will  be  rebuilt  or  replaced  promptly.
Controls  returned  under  our  service  policy  must  be
returned by Prepaid transportation. MAGNETROL will
repair or replace the control at no cost to the purchaser (or
owner) other than transportation if:

1. Returned within the warranty period; and
2. The factory inspection finds the cause of the claim to

be covered under the warranty.

If the trouble is the result of conditions beyond our con-
trol; or, is NOT covered by the warranty, there will be
charges for labor and the parts required to rebuild or
replace the equipment.

In  some  cases  it  may  be  expedient  to  ship  replacement
parts;  or,  in  extreme  cases  a  complete  new  control,  to
replace the original equipment before it is returned. If this
is desired, notify the factory of both the model and serial
numbers of the control to be replaced. In such cases, cred-
it  for  the  materials  returned  will  be  determined  on  the
basis of the applicability of our warranty.

No claims for misapplication, labor, direct or consequen-
tial damage will be allowed.

Return Material Procedure

So that we may efficiently process any materials that are
returned,  it  is  essential  that  a  “Return  Material
Authorization”  (RMA)  number  be  obtained  from  the
factory,  prior  to  the  material’s  return.  This  is  available
through  your  MAGNETROL local  representative  or
by  contacting  the  factory.  Please  supply  the  following
information:

1.  Company Name
2.  Description of Material
3.  Serial Number
4.  Reason for Return
5.  Application

Any unit that was used in a process must be properly
cleaned in accordance with OSHA standards, before it is
returned to the factory.

A Material Safety Data Sheet (MSDS) must accompany
material that was used in any media.

All shipments returned to the factory must be by prepaid
transportation.

All replacements will be shipped F.O.B. factory.

ASSURED QUALITY & SERVICE COST LESS

Viton is a registered trademark of DuPont Performance Elastomers
HART is a registered trademark of the HART Communication Foundation
PACTware is a trademark of PACTware Consortium
CSA logotype is a registered trademark of Canadian Standards Association
Tri-Clover is a registered trademark of Tri-Clover, Inc.
Lexan is a registered trademark of General Electric

Model R82 Radar transmitters may be protected by U.S. Patent No. US 7,271,646; May depend on model.

«
...
62
63
64

Содержание R82

































































Отзывы:

Нет отзывов

Похожие инструкции для R82

Бренд: Handic Страницы: 21

Бренд: SAMCOM Страницы: 16

IZAR RDC STANDARD

Бренд: Diehl Страницы: 40

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 40

Бренд: Audio Precision Страницы: 44

Бренд: halstrup-walcher Страницы: 32

Бренд: DigitaLinx Страницы: 8

Бренд: Kimo Страницы: 32

Бренд: Camille Bauer Страницы: 14

Бренд: Small Wonder Labs Страницы: 26

Бренд: Omega Engineering Страницы: 4

AVIP-P5104T-B1C

Бренд: CYP Страницы: 36

ES120-4X10 - REV D

Бренд: Simrad Страницы: 2

Бренд: Kantronics Страницы: 37

Бренд: Greystone Energy Systems Страницы: 8

Бренд: Techly Страницы: 42

Бренд: Vertex Standard Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды