20
58-610 Model R82 Radar Transmitter
2.6.4.4 Entering Numeric Data Using Increment/Decrement
Use this method to input the following data: Damping,
Echo Loss Delay, Trim Level, Trim 4 mA, Trim 20 mA,
Test 4-20 Loop and HART Poll Addr.
2.6.4.5 Entering Character Data
This method is used for entering alphanumeric charac-
ters, e.g., Input Local Tag.
Push button
Keystroke Action
Up
Moves to the previous character (Z,Y,X,W). If held
down the characters scroll until the push button
is released.
Down
Moves to the next item character (A,B,C,D). If
held down the characters scroll until the push
button is released.
Back
Moves the cursor back to the left. If the cursor
is already at the leftmost position, then the
screen is exited without changing the original
tag characters.
Enter
Moves the cursor forward to the right. If the
cursor is at the rightmost position, then the
new tag is saved.
Push button
Keystroke Action
Up
Increments the displayed value. If held down the
digits scroll until the push button is released.
Depending on which screen is being revised, the
increment amount may increase by a factor of 10
after the value has been incremented 10 times.
Down
Decrements the displayed value. If held down the
digits scroll until the push button is released.
Depending on which screen is being revised, the
decrement amount may increase by a factor of 10
after the value has been decremented 10 times.
Back
Returns to the previous menu without changing
the original value, which is immediately redis-
played.
Enter
Accepts the displayed value and returns to the
previous menu.
Figure 25
Figure 26
