Magnetic Autocontrol MPT-132, Руководство по эксплуатации

Страница: 39 / 68

Full Height Turnstile MPT-132
Assembly and installation
5817,5811EN / Version 02 39
5.4.9 Setting the blocked position (home position)
Figure 31 Setting the full height turnstile to the "blocked" position
1 Lock comb
2 Center column: blocked position
3 Cage halves
Fig. 32: Cam plate with proximity switch
1. Set the center column with lock comb to the "blocked" position
(see Page 39, Figure 31).
2. Check whether the cam plate is exactly in front of the proximi-
ty switch.
If it is clearly offset, the full height turnstile must be adjusted
as follows.
3. Loosen the hexagon socket screw SW4 on the cam plate.
4. Turn the cam plate so that it is exactly in front of the proximity
switch.
5. Retighten the hexagon socket screw.