Magnescale SmartSCALE SQ47-Z Series, Инструкция по эксплуатации

Страница: 35 / 82

(E)
3
SQ47-Z Series, CH22 Series
1-5. Functional Safety
Th is product is a functional safety magnescale which is compliant with EN 61800-5-2:Ed. 2.0: 2016 /
IEC 61508:2010 / IEC 62061:2005 SC3 SIL 2 and EN ISO 13849-1:2015 Cat.3 / PL d.
Behavior of the product when a fault arises. : Th e product shift s to a safe state within 5 ms when a
dangerous fault is detected.
Dangerous fault : An error
(
*
1)
in position measurement exceeds ±1 mm of reference.
Safe state : Th e product sends the alarm information to the controller via the DQ100, holds
the alarm information, and shift s to a safe state.
Recovery process : When the magnescale trouble is resolved, normal communication is restored
immediately aft er the product receives the Alarm Reset signal from the
controller. Otherwise, the alarm is held.
( * 1) : Th e error position information described here is a threshold value which is considered as a dangerous
fault value in terms of functional safety and is not the accuracy of the product. As for the accuracy
of the product, see Section 6. “Specifications.”
Th e product is maintenance-free and it is not necessary to replace the parts periodically.
Functional safety specifi cations
Mode of operation
Item
High demand / continuous mode
Probability of
dangerous failure
Operating temperature : +50°C PFH = 38 × 10
-9
(1/h)
Operating temperature : +25°C PFH = 10 × 10 -9 (1/h)
Operating temperature : 0°C PFH = 5.7 × 10 -9 (1/h)
MTTFd 85.4 years (High)
DCavg 79.08% (Low)
Hardware fault tolerance 1
Product type Type B
SIL 2
SC (Systematic capability) 3
Normative references
Standard Applied specifi cation
IEC 61508:2010 Functional safety
IEC 62061:2005+A1: 2012+A2: 2015 Functional safety
EN ISO 13849-1:2015 Functional safety
IEC 60664-1:2007
Clearances (between PWB (Printed wiring board) patterns)
specifi cation
EN 61800-5-2:E.d. 2.0: 2016
Requirements related to Table D.16 Motion and position
feedback sensors
IEC 62061:2005+A1: 2012+A2: 2015 Table D.1 Failure Mode
IEC 60068-2-1, IEC 60068-2-2,
IEC 60068-2-6, IEC 60068-2-14,
IEC 60068-2-27, IEC 60068-2-30,
IEC 60068-2-31
Environmental Tests
IEC 61000-6-4:2006 +A1:2010
CISPR 16-1-1:2010, clause 4
CISPR 16-1-4:2010, clause 4.4 and 5
CISPR 16-2-3:2010, clause 7.2
Emission
IEC 61000-6-2:2016
IEC 61326-3-1:2017
IEC 61000-4-2:2008
IEC61000-4-3:2006 +A1:2007 +A2:2010
IEC 61000-4-4:2012
IEC 61000-4-6:2013
IEC 61000-4-8:2009
Immunity
For details about functional safety, contact our functional safety department.
45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan TEL: +81 (0)463 92 1011 FAX: +81 (0)463 92 1012