Magnescale MJ100, Руководство пользователя

Страница: 26 / 64

2
(E)
1-2. Precautions
When installing the MJ100/MJ110, observe the following to
prevent noise interference from other equipment.
1. Provide noise-preventive measures to relays, solenoids and
motors connected to the MJ100/MJ110.
2. Take preventive steps when the noises from other equipment
may disturb the power supply line to the units.
3. Shield the output cable correctly according to the instruction
manual.
Be sure to ground the MJ100/MJ110 with an earth wire or by
mounting it on the machine with screws.
1-3. Installation
• Use the MJ100/MJ110 in the temperature range of 0 to 45°C /
32 to 113°F. Do not expose it to the sunlight or source of heat.
A well-ventilated place is preferable.
• Separately route the head cable and output cable from the
power line.
• When installing the interpolator in a place where it may be
exposed to water splashes, make it water-proof by providing a
cover or by some other means.