9/12
LH72 initial Setup Manual
1. Hold down key and key at the same time to start the power supply.
⇒
The model name of the counter is displayed
2. When you press key, is displayed,
followed by .
3. Pressing key changes the display as shown below.
４．
"RUN" LEDs will be lit.
５
. Press key to confirm the number of input axis.
６．
Turn off the primary power supply of the AC adapter.
In case of LH72-3
is displayed.
To set the factory settings (all clear), perform the following operations.
Make preparation such as taking notes in advance for necessary items.
Also, do not perform any operation other than the explanation.
Factory Default (All Clear)
Mainly used keys
Reference key
Setup key
How to check the software version:
Power ON → Display LH → Key → Version
Press any key to return to the LH display.
Connect the AC adapter to the DC-IN input on the back of the counter and
turn on the primary power supply.
Lights up
”
RUN
”
Edit key
DC input
Connecting the AC Adapter
AC primary power source
START
completion
→
→
→
→
→
→
Caution: If you do this, all settings will be the factory default settings.
