5/12
LH72 initial Setup Manual
input 3- input 2
input 2
input 3
input 2 + input 3
input 2 – input 3
- (input 2 + input 3)
How to set up Basic Settings (2/3)
Enter the settings confirmed in "Preparations before making initial settings (1/2)".
Repeat steps (1), (2), and (3) to make the basic settings.
Step 2
COUNTRY
(destination)
ADD
（
addition display
）
SIG RES
(measuring unit resolution)
STANDARD
(General area)
U.S.A.
JAPAN
0.5μm
0.1μm
10μm
5μm
1μm
10 minutes
1 minute
10 seconds
1 second
How to view extended
settings:
For extended settings,
press key(EDIT)
when the input resolution
of each axis is displayed.
2μm
100μm
50μm
25μm
20μm
0.05μm
1 degree
default
default
B
a
si
c
S
e
tt
in
gs
(1) Use key to change the basic setting item.
(2) The setting selection can be switched with key on the right side of the counter display.
(3) To define the new value, press key.
Display method:
- For each setting item, the current setting
contents are displayed after about 1 second. If
there is no change in the contents, move to the
next section with key.
