EN
9
PREPARATION
1.
DVD/VCR AUDIO OUT jack
p.10
•
Connect an RCA audio cable from here to the audio input
jack on your television or audio device. Standard connection
for DVD/VCR use.
2.
VCR AUDIO IN jack
p.22
•
Connect an RCA audio cable from the audio output jack on
your camcorder, VCR, etc. to here.
3.
DIGITAL AUDIO OUT COAXIAL* jack
p.12
•
Connect a digital audio coaxial cable from here to the
digital audio coaxial in jack on a decoder or audio receiver.
4.
DVD AUDIO OUT* (analog) jack
p.11
•
Connect an RCA audio cable from here to the audio
input jack on your television or audio device.
5.
COMPONENT VIDEO OUT* jacks
p.11
•
Connect component video cables from here to the
component video input jacks on your television.
6.
DVD/VCR VIDEO OUT jack
p.10
•
Connect an RCA video cable from here to the VIDEO
input jack of your television or audio device. Standard
connection for DVD/VCR use.
7.
VCR VIDEO IN jack
p.22
•
Connect an RCA video cable from here to the video
output jack on your camcorder, VCR, etc.
*
For enhanced DVD viewing. DVD/VCR video and audio
connection required to view cassette tapes.
Note:
•
RCA audio and video cables are included for both
VCR and DVD viewing. You can enhance your DVD
picture and sound quality with component video cables
or a digital audio coaxial cable.
Please purchase the
necessary cables at your local store.
(Refer to pages
11-12.)
Rear Panel
DIGITAL
AUDIO OUT
COAXIAL
AUDIO OUT
DVD
VCR
DVD/VCR
COMPONENT
VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L
Y
R
R
CB
CR
3 4
5 6 7
L1
1
2
L1
Install the 2 AA (1.5 V) batteries matching the polarity indicated
inside battery compartment of the remote control.
Keep the following in mind when using the remote control:
•
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
•
The maximum operable ranges of the unit are:
-
Line of sight:
approx. 23 feet (7m)
-
Either side
of center:
approx. 16 feet (5m) within 30°
-
Above:
approx. 16 feet (5m) within 15°
-
Below:
approx. 10 feet (3m) within 30°
16 feet (5m)
Ý
Ý
16 feet (5m)
23 feet (7m)
Caution: Never throw batteries into a fire.
Note:
•
Do not mix different types of batteries together (e.g.,
Alkaline and Carbon-Zinc) or old batteries with fresh
ones. Although they may look similar, different batteries
may have different voltages.
•
If the remote control is not to be used for a long
period of time, remove the batteries to prevent damage
or injury from possible battery leakage.
•
Do not try to recharge batteries; they can overheat and
rupture.
•
Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
Installing the Batteries in the Remote Control
PREC
A
UTIONS
PREP
ARA
TION
AD
VANCED PLA
YB
A
C
K
B
ASIC OPERA
TIONS
RECORDING
OPTIONAL SETTINGS
TR
OUBLESHOO
TING
INFORMA
TION