EN
22
RECORDING
Satellite Link
You can set the unit to start recording whenever it detects a
video signal from the external tuner.
Preparing for the Satellite Link:
•
Only L1 (rear) is available for satellite link and be sure that this
L1 needs to be connected by the external tuner.
•
The external tuner should be equipped with some kind of timer
function. Using timer function of the tuner, set it to the output
audio/video signals when it comes to the time you want to start
recording, and stop those signals when it comes to the time you
want to finish recording.
Refer to the tuner’s manual on how to set the timer.
DIGITAL
AUDIO OUT
COAXIAL
AUDIO OUT
DVD
VCR
DVD/VCR
COMPONENT
VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L
Y
R
R
CB
CR
VCR
AUDIO IN
VIDEO IN
To video out jack
L1
external tuner
To audio(L)out jack
RCA audio/video cables
VHS
V
V
V
V
V S
VHS
VHS
VHS
VHS
Press
first.
1
Press
to select the desired
tape speed.
SP
2
In the stop mode, press
SETUP
.
3
Use
/
to select
“SATELLITE LINK”. Then, press
to go to the next step.
- M E N U -
TIMER
PROGRAMMING
B
SATELLITE LINK
AUTO
REPEAT
[OFF]
CLOCK
SET
LANGUAGE
SELECT
4
Use
/
to select the
desired hour. Then, press
to
go to the next step.
SATELLITE LINK
0 1 : 0 0 PM
Then, repeat procedures above to
select the minute as well.
The hour can be selected from 1-12 with AM or PM.
When the external tuner signal is stopped, recording
will be stopped.
5
Press
to set satellite
link standby mode.
SATELLITE LINK
0 1 : 3 0 PM
[ON]
[TIMER REC] indicator: lights up and the unit goes to
the DVD mode. If you do not use DVD function, turn
OFF the unit.
An external tuner must be turned ON for satellite
link to start. If external tuner is not set to output
signals, satellite link will remain in standby mode.
To Cancel the Satellite Link on Standby:
To Cancel the Satellite Link on Standby:
Press [TIMER SET] on the remote control or
[
C
A
] on this unit.
To Cancel the Satellite Link in Progress:
To Cancel the Satellite Link in Progress:
Press [
C
A
] on this unit.
Note:
•
Recording picture will be distorted if the copy
protection signal is being detected during satellite link.
•
When the timer recording and the satellite link are
overlapped, those recordings are recorded as illustrated
below.
e.g.)
In case of the satellite link is overlapped on the
existing
timer
recording.
timer recording
recording result
satellite link
e.g.)
In case of the timer recording is programmed in
the middle of the satellite link.
timer recording
recording result
satellite link
e.g.)
In case of the timer recording is overlapped on
the existing satellite link.
timer recording
recording result
satellite link
Dubbing a Cassette Tape
Warning:
Unauthorized recordings of copyrighted cassette
tapes may be an infringement of copyright laws.
AUDIO
VIDEO
AUDIO OUT
L
R
VIDEO OUT
or
output jacks of
external device
RCA audio cable
RCA video cable
front of the unit
L2
You can use a video disc player, cable/satellite box or other
devices with Audio/Video output jacks.
VHS
V
V
V
V
V S
VHS
VHS
VHS
VHS
Press
first.
1) Press [SPEED] on the remote control to select recording
speed (SP or SLP).
2) Press [INPUT] on the remote control to select L1 or L2
whichever Jack the external device is connected to.
3) Press [REC] on the unit, and then start playback of the
external device.
4) To stop recording, press [
C
A
] on this unit.
5) Stop playback of the external device.
Note:
•
For best results during dubbing, use buttons on this unit
whenever possible. The remote control might affect
another device’s operation.
