EN
27
INFORMATION
Specifications
Servicing
Servicing
•
Please refer to relevant topics on the “Troubleshooting Guide”
on page 26 before returning the product.
•
If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
Cleaning the Cabinet
Cleaning the Cabinet
•
Wipe the front panel and other exterior surfaces of the unit
with a soft cloth.
•
Never use a solvent, thinner, benzene or alcohol to clean the
unit. Do not spray insecticide liquid near the unit. Such chemicals
may discolor the surface or damage the unit.
Cleaning Discs
Cleaning Discs
•
When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular
motion.
•
Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
Cleaning the Disc Lens
Cleaning the Disc Lens
•
If this unit continues to perform improperly even after you have
referred to the relevant sections and to the “Troubleshooting
Guide” in this manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center for
inspection and cleaning of the laser optical pickup unit.
Disc Handling
Disc Handling
•
When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
•
Always store the disc in its protective case when not in use.
•
Do not glue paper or put stickers onto the disc. This may
damage the disc, and the unit may not read it correctly.
Auto Head Cleaning
Auto Head Cleaning
•
Automatically cleans video heads as you insert or remove a
cassette tape, so you can see a clear picture.
•
If the playback picture is blurred or interrupted while the TV
broadcast is showing clear, the dirt may have accumulated on
the video heads, or the usage of rental or worn cassette tapes
can cause this problem. If a streaky or snowy picture appears
during playback, the video heads in your unit may need to be
cleaned.
1.
Please visit your local audio/video store and purchase a
good quality VHS video head cleaner.
2.
If a Video head cleaner does not solve the problem, please
call our toll free customer support line found on the cover
of this manual to locate an authorized service center.
Note:
•
Remember to read the instructions along with the
video head cleaner before use.
•
Clean video heads only when problems occur.
IR Signal Check
IR Signal Check
•
If the remote control does not work properly, you can test if
the remote control sends out the infrared signal using a digital
camera (including the built-in camera of a cellular phone). It will
help to define the cause of malfunction.
Using a digital camera (including the built-in
camera of a cellular phone):
Direct a digital camera to the remote control,
press and hold a button on the remote control.
If infrared light appears on the digital camera
screen, the remote control is working.
Output signal format :
NTSC color
Video heads :
Rotary four-head
Tape width :
1/2 inch (12.65 mm)
Tape speeds :
SP :
1-5/16 inch/sec. (33.40 mm/sec.)
LP : 16.67 mm/sec.
SLP : 7/16 inch/sec. (11.12 mm/sec.)
Disc media size :
5 inches (12 cm) / 3 inches (8 cm)
Terminals :
Component video output :
RCA jack x 3
Y
: 1
Vp-p (75
Ω
)
Pb
: 700
mVp-p (75
Ω
)
Pr
: 700
mVp-p (75
Ω
)
Video output
:
RCA jack x 1
1 Vp-p (75
Ω
)
Coaxial digital audio output :
RCA jack x 1
500 mVp-p (75
Ω
)
Audio output
:
RCA jack x 4
2 V rms
Video input
:
RCA jack x 2
1 Vp-p (75
Ω
)
Audio input
:
RCA jack x 2
2 V rms
Remote control :
Digital encoded infrared light system
Operating temperature :
41 °F (5 °C) to 104 °F (40 °C)
Power requirements :
120 V AC +/- 10 %, 60 Hz +/- 0.5 %
Power consumption (maximum) :
16
W
(standby : 2.8 W)
Dimensions :
W : 17 3/16” (435
mm)
H
: 3 3/4”
(94
mm)
D
: 9 3/16”
(233
mm)
Weight :
Approx. 5.63 lbs (2.55 kg)
•
Designs and specifications are subject to change without notice.
•
If there is a discrepancy between languages, the default language
will be English.
Maintenance
INFORMATION
Note:
•
Some cameras have an IR Filter and will not display the
IR signal.
PREC
A
UTIONS
PREP
ARA
TION
AD
VANCED PLA
YB
A
C
K
B
ASIC OPERA
TIONS
RECORDING
OPTIONAL SETTINGS
INFORMA
TION
TR
OUBLESHOO
TING
