Magnavox MDV260V, Руководство пользователя

Страница: 21 / 28

EN
21
RECORDING
Timer Recording
VHS V V V V V S VHS VHS VHS VHS
Press first.
1
Press
SETUP
, Use / to select
“TIMER PROGRAMMING”.
Then, press
to go to next step.
TIMER PROGRAMMING
PROG. 12345678
DATE
START TIME
END TIME
L1/L2
REC SPEED
- M E N U -
B
TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
Available program
number blinks.
2
Use / to select an
empty program number. Then,
press
to go to next step.
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
L1/L2 – –
REC SPEED – –
3
Use / to select “ONCE“,
“DAILY” (Mon-Fri), or “WEEKLY“.
Then, press
to go to next step.
PROGRAM NUMBER 1
B
ONCE
DAILY
WEEKLY
4
Use / to select the
desired month. Then, press
to go to the next step.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 2 TUE
START TIME – – : – – – –
END TIME – – : – – – –
L1/L2 – –
REC SPEED – –
Then, repeat procedures above to select the day, start
time, end time, and “L1” or “L2” as well.
5
Use / to select recording
speed. Then, press to remove
the MENU.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 2 TUE
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
L1/L2 L1
REC SPEED SP
B
SP
SLP
To set another program after step
5
, press .
Then, repeat procedures from steps
2
through
5
.
You can program the unit to record up to 8 programs,
and up to 1 year in advance.
6
Press to set the timer standby mode.
The [TIMER REC] indicator on this unit lights up and
the unit goes to the DVD mode.
Note:
•
To go back one step, press
[ 0 ]
during steps
3
to
5
.
•
Select “L1” or “L2” to activate rear input jacks or front
input jacks accordingly.
To Check, Correct or Cancel a Timer Program To Check, Correct or Cancel a Timer Program
1) Press [TIMER SET], and then press [VCR ] on the
remote control.
2) Repeat procedures in step 1 above.
3) Use [
K
/
L
] to select the program number you want to
check. The details of the program you select will appear on
the TV screen.
Use [
0
/
1
] to go to the digit you want to change.Then,
use [ K / L ] to enter the correct numbers.
You can cancel the entire program by pressing [ 0 ] while
the program number blinks.
4) Press [CLEAR] to exit.
5) Press [TIMER SET] to return to the timer standby mode.
To Cancel a Timer Recording in Progress To Cancel a Timer Recording in Progress
Press [ C A ] on the unit.
Note for Timer Recording & OTR
•
If a power failure occurs or the cassette tape does not have the
erase-protection tab,
the [TIMER REC] indicator blinks and timer recording cannot
be performed.
•
If there is a power failure occurred or the unit is unplugged for
more than 30 seconds, clock setting and all programmed timer
recordings will be lost.
•
If a cassette tape runs out before an OTR or a timer recording
is finished, the unit ejects the cassette tape.
After an OTR or a Timer Recording Has Been After an OTR or a Timer Recording Has Been
Set, This Unit Operates as Follows: Set, This Unit Operates as Follows:
•
Press [TIMER SET] on the remote control or [
C A
] on the
unit, then press
[VCR ]
to activate the VCR function again.
•
To cancel the timer standby mode, press [TIMER SET] on the
remote control or
[ C A ]
on the unit, then press
[VCR ]
to
activate the VCR function again.
When an OTR or a Timer Recording is Completed. When an OTR or a Timer Recording is Completed.
•
If timer programs are left on the VCR, the unit will switch to
the DVD mode and then the VCR will go standby for the next
timer recording. (All the VCR functions will be unavailable.) If
auto power off has been in effect, however, both DVD and VCR
will go to standby mode.
•
All the DVD functions are available while the VCR is in OTR,
Timer standby, or Timer Recording mode.
•
The
[TIMER REC] indicator
blinks if there are no more timer
programs.
•
Press [
C A
] on this unit or [TIMER SET] on the remote
control to use the VCR when the unit is turned off.
To Use the DVD Player During Timer Recording or To Use the DVD Player During Timer Recording or
While the [TIMER REC] Indicator is On or Blinking. While the [TIMER REC] Indicator is On or Blinking.
•
Press
[STANDBY-ON y ]
to turn On the unit. Press
[DVD ]
on the Remote Control to choose DVD mode. Then continue
with the other DVD features as described in this manual.
PREC
A
UTIONS
PREP
ARA
TION
AD
VANCED PLA
YB
A
C
K
B
ASIC OPERA
TIONS
RECORDING
OPTIONAL SETTINGS
TR
OUBLESHOO
TING
INFORMA
TION