Press the LOCK Button
1. The horn/siren chirp 1 time.
2. The LED will flash 1 time.
3. The LOCK button is now
programmed. To program
additional transmitters at this
time, press each transmitters
LOCK button.
4.Flip the Valet Switch On/Off 1 time.
Press the UNLOCK Button
1.The horn/siren chirp 2 times.
2.The LED will flash 2 twice.
3.The UNLOCK button is now
programmed.
4.To program additional
transmitters at this time, press
each transmitters UNLOCK button.
5.Flip the Valet Switch On/Off 1 time.
Press the AUX Button
1.The horn/siren chirp 3 times.
2.The LED will flash 3 times.
3.The AUX button is now
programmed.
4.To program additional
transmitters at this time, press
each transmitters AUX button.
5.Turn OFF ignition key. The
siren/horn will sound 1 short and
1 long chirp to indicate
programming is complete
OFF
ON
X1
Step 3
Step 4
Step 5
ON
Step 1
Flip Valet Switch On/Off 4 Times
The horn/siren will Chirp 2 time and the LED indicator will be on solid. This
indicates the module is ready for separate channel button mode.
Step 6: Remote Feature Programming
The security system control module is pre-programmed for specific factory default settings. The
default settings can be changed by following the enclosed procedures. Remote feature
programming is divided into 3 parts. To enter feature programming you must turn on the ignition
key and activate the valet switch 6 times for part 1 programming. 8 times for part 2 programming
and 10 times for part 3 feature programming.
#
Programmable Feature
Default Setting
1
Chirp Status Indicator with Single Unlock Pulse
On
2
Last Door Closed Automatic Arming
Off
3
Ignition Key Controlled Door Lock/ Unlock
On
4
Door Lock/Unlock Pulse Timing
.8 sec
5
Parking Lights On/Off upon Disarm
Off
6
Current Sensing On/Off
Off
7
Car Jacking Feature
Off
Turn On the Ignition Key
Step 2
X4
OFF
ON
X1
OFF
ON
☛
13
Step 5: Transmitter Coding (Continued)
