16
About Multiple Car Programming:
Multiple car (Alarm) operation can only operate correctly when all transmitters on all systems are
programmed in “B” mode (Separate Channel Mode). You can not mix “A” mode programming
and “B” mode programming. Follow the transmitter coding information in this manual step 3, 4
and 5B part 1. To code a 2nd car, get into code learning (Steps 3 and 4) on the 2nd system and
complete step 5B, part 1 and press the transmitters “UNLOCK” button. To code a 3rd car, get into
code learning (Steps 3 and 4) on the 3rd system and complete step 5B, part 1 and press the
transmitters “AUX” button. Alternatively,We Have an optional 5-button transmitter for 2 car
operation that allows complete independent control of each function using the dedicated buttons
mode.
Step 7: Multiple Car Programming
#
Button
Changed Function
Confirmation
Car Jacking Feature is "ON"
1-Chirp, LED Parking Lights Flash
1
AUX
Car Jacking Feature is "OFF" (Default)
2-Chirps, LED Parking Lights Flash
Car Jacking Feature
Step 6: Remote Feature Programming (Part 3)
OFF
ON
Turn On the Ignition Key
Flip the Valet Switch On/Off 10 Times
The LED will be on solid. The horn/siren will emit 10
short chirps to indicate you are now in Part 3 “Remote
Feature Programming” mode.
Step 1
Step 2
ON
X10
OFF
Part 5
Turn Off the Ignition
The LED will be off and the horn/siren will emit 1 short beep and 1 long beep. You are now out of the feature
programming mode.
