12
Step 5: Transmitter Coding
ON
Remote Transmitter Coding and Operation:
The supplied transmitters are pre-programmed to the security system alarm module using
dedicated buttons mode. Follow the procedures below to add replacement transmitters or to change
from dedicated buttons mode to separate channel mode
Step 2
Step 1
Turn On the Ignition Key
Flip Valet Switch On/Off 3 Times
The horn/siren will Chirp 1 time and
the LED indicator will be on solid.
This indicates the Module is ready
for programming dedicated button
mode.
X3
Step 3
☛
Depress Lock Button
The horn/siren will chirp 1 time and
the LED will flash 1 time. The
transmitter is now fully programmed
to the module. To program
additional transmitters at this time,
depress the lock button on each
additional transmitter. You will get 1
chirp and 1 flash from the LED when
the transmitter is learned.
OFF
Turn Off Ignition Key
The horn/siren will sound 1 short +
1 long beep. Transmitter
programming is now completed.
Step 4
Separate Channel Mode:
When programmed for separate channel mode the transmitters buttons operates as follows:
Lock Button
:
Lock/Unlock
Unlock Button
:
Channel 2
Aux
:
Channel 3
Panic Button
:
Panic,
To program the module for separate channel mode, follow these Instructions continued on the next page.
OFF
ON
