1-800-MAGLINE (624-5463)
Page 39 www.magliner.com
CooLift
®
REPLACING BRAKE LINE CLIPS
Note: It is important to keep the CooLift upright at all times.
1)
Place the CooLift on a level flooring surface with the holding brake engaged.
2) Turn off main power switch.
3) If the brake clip is still closed around the brake line, slide the clip open by sliding the two pieces of
the top of the clip away from the center of the clip; remove brake line from clip.
4)
Grab the brake clip with either your fingers or pliers and firmly pull towards the inside of the deck
to remove the clip.
5) Align a new brake clip so that the point of the brake clip will enter the frame from the inside of the
unit and push the clip to snap into place.
6) Return brake line to inside of clip. Push the longer side of the clip top down towards the brake line
to close the clip.
Closed position
Open position
Item
Qty.
Part Number
Brake line clip
6
61019
Item
Qty.
Part Number
A
Caliper assembly
1
309595
B
Caliper brake line assembly
(includes items C-G)
1
309145
C
O-rings
-
n/a
D
Banjo bolt
-
80135
E
Banjo fitting on brake line
-
n/a
F
Junction block (one per CooLift)
1
309051
Quantities listed for items A-B are for one side of the CooLift
A
B
F
D
C
E
