30 MAGICFX
®
STADIUMSHOT III
—
User and Installation Manual
4.
Set the DMX value for the effect channel between 200 and 255 to shoot.
5.
Enjoy the view!
6.
Turn the enable address and the effect channel back to 0.
7.
Disarm the system by turning the key counterclockwise on the MAGICFX
®
FX-ARM CONTROLLER.
If pyro is used, follow the next steps:
1.
Make sure that the prescribed safety zone is free from persons and objects.
2.
If the safety zone is free, arm the system by turning the key clockwise on the
MAGICFX
®
FX-ARM CONTROLLER. The FX LED lights up.
3.
Activate the pyro controller.
4.
Enjoy the view!
5.
Deactivate the external low voltage pyro controller (24V).
6.
Disarm the system by turning the key counterclockwise on the MAGICFX
®
FX-ARM CONTROLLER.
In case of emergency or an unexpected unsafe situation, push the emergency
button on the MAGICFX
®
FX-ARM CONTROLLER. The machine is now unable to shoot.
To reset the MAGICFX
®
FX-ARM CONTROLLER
, follow the steps below:
1.
Turn the key counterclockwise to disarm the system.
1.
Twist the e-stop button on the MAGICFX
®
FX-ARM CONTROLLER clockwise.
2.
Push the e-stop reset button on the MAGICFX
®
FX-ARM CONTROLLER.
3.
If DMX is used, set the enable and effect channel back to 0.
The machine is ready to be used again.
