Magellan Power MCRII Series, Руководство по эксплуатации и обслуживанию

Страница: 22 / 36

OPERATION AND MAINTENANCE MANUAL
SINGLE PHASE MCRII SERIES BATTERY CHARGER
Rev: 1.15 22/08/2018 Doc: MAN-1P_MCRII Page 22 of 36
Australian Technology – Australian Made
64 Bushland Ridge, Bibra Lake, WA 6163 P: +61 8 9434 6621 F: + 61 8 9434 6623
E:
sales@magellanpower.com.au
W:
www.magellanpower.com.au
Sub Menu 2 Alarm and Trip Settings
The following parameters are used for setting alarm and over/under voltage trip and
delay times.
Hi Voltage Alarm Sets activation voltage of the DC High alarm.
Hi Voltage Alarm Delay Sets the delay time (seconds) between alarm
detection and alarm indication.
Low Voltage Alarm Sets activation voltage of the DC Low alarm.
Low Voltage Alarm Delay Sets the delay time (seconds) between alarm
detection and alarm indication.
Over Voltage Trip Sets activation voltage of the Over Voltage Trip
alarm and protection relay (optional).
Over Voltage Trip Delay Sets the delay time (seconds) between alarm
detection and alarm indication.
Under Voltage Trip Sets activation voltage of the Under-Voltage Trip
alarm and protection relay (optional).
Under Voltage Trip Delay Sets the delay time (seconds) between alarm
detection and alarm indication.
Charger Fail Delay Sets the delay time (seconds) between alarm
detection and alarm indication of the Charger Fail
Alarm.
Battery Topping Temperature Sets the battery temperature at which point the
charging current is reduced by 50% to prevent
overheating. This should be set to 250 if not
used.
Battery Over Temperature Sets the battery temperature at which point the
charging is terminated. This should be set to 250
if not used.
Maximum Impedance Change Percentage Change in the battery impedance
value beyond which the battery is considered to
be faulty.