OPERATION AND MAINTENANCE MANUAL
SINGLE PHASE MCRII SERIES BATTERY CHARGER
Rev: 1.15
22/08/2018
Doc: MAN-1P_MCRII
Page 20 of 36
Australian Technology
–
Australian Made
64 Bushland Ridge, Bibra Lake, WA 6163 P: +61 8 9434 6621 F: + 61 8 9434 6623
6.0
ADJUSTMENTS
The Programmable Setpoints can be programmed either from the Keypad LCD panel
or from a computer connected to the charger through the communication card. Some
of the settings are password protected to prevent unauthorised changes from being
implemented. This password protection is not present when using the computer link.
6.1
SETTING FROM THE KEY-PAD
1.
Hold down MODE/ACK, - and + keys together for more than 5 seconds. This
will take the controller to the programming mode.
2.
Go to the appropriate Sub-menu by operating the -/+ arrow keys. Select by
pressing the MODE key. Pressing the MODE key again will take the screen to
the next item under the Sub-menu.
3.
Once the desired Setpoint is displayed, adjust by pressing the -/+ keys on the
front panel key-pad for the required setting.
4.
To save and exit press BACK key.
6.2
SETTING FROM THE COMPUTER
The details are given in the MCRII Remote Communications Manual supplied with
the MCRII Remote Communications Package.
