-25-
8
Troubleshooting
Danger
Determining the causes for existing defects and eliminating these always requires
increased attention and caution. Pull the mains plug beforehand!
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
Defect
Cause
Elimination
Decreasing extraction performance
Filter soiled
Clean.
Non-woven filter full
Change.
Container full
Empty.
Nozzle, tube or hose clogged Clean.
Dust extractor does not start
Power plug in socket outlet?
Mains de-energised?
Mains cable ok?
Cover closed properly?
Water sensor switched off?
Dust extractor in standby
mode "AR"?
Set to "I" or "IR"
Dust extractor does not start when the
tool is switched on in >AR< mode
Power plug of tool in device
socket outlet?
Put power plug in dust extractor
socket outlet
PE-discharge and disposal bag is
sucked against the filters
Wrong position rotary valve
Check/change position of rotary
slide valve
Dust extractors class M or H: dust in
container despite fitted non-woven filter
Wrong position rotary valve
Check/change position of rotary
slide valve
9
Special accessories
-
Set of filter bags 5 pcs. (25-l non-woven material)
Order No. 093719
-
Set of disposal bags 5 pcs. (25-l-PE)
Order No. 093721
-
1 pair pleated filter cartridge (cellulose, glass fibre fleece, polyester)
Order No. 093739
-
1 pair pleated filter cartridge (polyester nano-coated)
Order No. 093720
-
1 pair pleated filter cartridge (polyester fleece)
Order No. 093674
-
4 m extraction hose LW27 machine connection Ø 35 mm antistatic
Order No. 093684
-
5 m extraction hose LW35 machine connection Ø 35 mm antistatic
Order No. 093681
-
5 m extraction hose machine connection Ø 49 mm static
Order No. 093730
-
Manual extraction set
Order No. 093718
-
Reducing adapter Ø 58 / 35
Order No. 203602
10
Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com