-22-
Detach the upper part of the dust extractor from
the container 12 (fig. 4).
Pull the filter bag carefully from the intake port.
Close the flange of the filter bag by turning down
the cover.
4.4.2
Changing the PE-discharge and disposal
bag
PE-discharge and disposal bag: Switch on dust
extractor, shake off folded filter cartridges.
Switch on dust extractor.
Wear mouth guard.
Remove suction hose, close intake port with cap
14 (fig. 6).
Open lateral locks, remove top part. Before
putting down the top part, switch on at switch
position >IR< so that possibly released airborne
particles are extracted.
Carefully seal PE-discharge and disposal bag
with the enclosed sealing tape.
Pull flange carefully off the intake port and
close.
Carefully remove PE-discharge and disposal
bag from the container.
Dispose of extracted material in accordance
with the legal provisions.
4.5
Disposal of filter bags
Dispose of the filter bag in an impervious bag in
compliance with the valid regulations for the disposal
of such wastes.
-
Filter bags, filled with normal domestic dirt are
disposed of with the normal domestic waste.
-
PE-discharge and disposal bag, filled with
hazardous waste: Enquire at your municipality or
at the responsible authority.
4.6
Inserting the filter bag
4.6.1
Inserting the non-woven filter bag
Pull the flange completely over the intake port.
Operation of the rotary valve
Set the red rotary valve*
inside to CLOSE and turn
until it reaches the stop at the
mark ▲.
Put top part onto container and close lateral
locks.
4.6.2
Inserting the PE-discharge and disposal
bag
Only dust extractors class
S25L/S25M with special container
and rotary valve in the intake port
of types S25L/S25M are suitable
for use with PE-discharge and
disposal bags.
Operation of the rotary valve
Set the red rotary valve*
inside to OPEN and turn until
it reaches the stop at the
mark ▲.
Push flange completely over intake port, place
top opening of bag across rim of container.
Put top part onto container and close lateral
locks.
