Maeda MC-174CRM, Руководство по эксплуатации

Страница: 30 / 276

2-8
2.2 AFTER STARTING THE ENGINE
INSPECTION AFTER STARTING THE ENGINE
Omitting the inspections after starting the engine results in delay to notice any machine abnormalities,
and may result in bodily accidents and Machine damage.
Inspect a wide area to ensure no obstacles, also ensure people are prevented from approaching the
Machine.
•
Inspect the equipment operation conditions, Machine travelling conditions, outrigger operation
conditions, winch winding up and down, boom derricking, and crane operation conditions such as
extension, retraction and swinging.
• Inspect the sound, vibration, heat and odor of the Machine, and check for instrument errors, air leaks,
oil leaks, fuel leaks and other bad factors. Be extra careful with fuel leaks.
• Always repair broken part whenever an abnormality is found.
Attempt to use without servicing may result in unexpected bodily accidents and/or Machine failures.
CAUTIONS WHEN STARTING TO MOVE THE MACHINE
To prevent serious injuries and death accidents, always execute the
followings before moving the Machine.
•
Set the Machine to the travelling position in the right diagram.
Do not travel when the hook block is not contained.
•
Ensure the boom is fully lowered and retracted.
• Fix the hook block into the containment position.
• Ensure the outrigger is contained.
See “Operation 2.5 Machine Travel Position” for details.
• Make sure again that no one or object is in the vicinity before
starting to move.
• Blow the horn for warning before starting to move.
• When travelling, be sure to stand in front of the travel lever located
on the travel control panel side. When the machine starts moving,
walk and keep your pace with the machine speed.
• The Machine is prohibited to travel when a person or load is on the
travelling dolly or the boom.
• When travelling, stow hook and outrigger, and make sure of the
surrounding safety.
• When stowing outriggers, insert each position pins completely to
lock.
CAUTIONS WHEN MOVING FORWARD/BACKWARD OR CHANGING DIRECTION
Always observe followings to prevent serious injuries and death
when moving the Machine.
•
Drop the speed early and wait until the Machine stops before
changing from forward to backward, or backward to forward.
• Blow the horn and alert the people nearby before changing
between forward/backward movements or changing direction.
• Check that no one is around the Machine.
The front of the Machine frame requires special attention because
certain areas of vision are blocked, so stop the Machine as
necessary and make sure no one is at front or around.
• Place a guide if the location is hazardous or with a bad view.
• Make sure to prevent people from crossing the moving direction or
in the direction to be changed.