Maeda MC-174CRM, Руководство по эксплуатации

Страница: 200 / 276

4-28
[4] CHECKING/CLEANING FUEL FILTER POT
• The fuel filter pot has fuel (gasoline) inside. Be extremely careful of fire such as cigarette when
cleaning the fuel filter pot.
• If the fuel spills when the fuel filter pot is removed, thoroughly wipe it off.
CAUTION
Water or dust accumulated inside the fuel filter pot will cause engine failure. Check inside the
cup and remove any water or dust accumulated inside.
1. Place the machine on a level surface.
2. See
“Operation 1.6 Machinery Cover” to remove the machinery
cover.
3. Check the fuel filter pot (1) inside to make sure that there is no
water or dust remaining in it.
4. If any water or dust is found to remain inside the filter pot, clean
the pot internals in the following procedure.
(1) Turn the fuel lever (2) to horizontal position (Close) to stop
fuel flow.
(2) Turn the filter pot (1) and remove the filter pot (1) from the
head (3).
(3) Discard any fuel or water in the filter pot (1).
(4) Detach the filter net (4) in the filter pot (1) and remove all the
dirt and dust adhered to the net.
(5) Return the filter net (4) to the filter pot (1), use the packing (5)
and fit the filter pot (1) to the head (3).
(6) Turn the fuel lever (2) to vertical position (Open) to open the
fuel circuit.
NOTES
To fasten the filter pot (1) to the head (3), a retainer ring (6) is
used. To unfasten the filter pot (1), turn the retainer ring (6)
counterclockwise. To fasten filter pot (1), turn the retainer ring (6)
clockwise.
5. See
“Operation 1.6 Machinery Cover” to install the machinery
cover.