Maeda MC-174CRM, Руководство по эксплуатации, Страница: 124 / 276

3-62
2.6 STARTING MOVING THE MACHINE
• Do not allow anyone around the machine.
• Clear away all the obstacles on the travelling path.
Check for projections and grooves on the travelling path especially when going backward. Fix
the travelling path.
• Check the safety around the machine and honk the horn before starting to move the machine.
• This machine is designed that the person who operates it should move along with it, when the
machine starts travelling. Set the engine speed to low and operate the left and right travelling
levers slowly at the same time. Check the travelling speed of the machine.
Do not make a sudden start especially when you are going backward. You can cause serious
accidents.
• The front of the machine will be the out of view. Be
extremely careful when moving forward.
• If you cannot verify the safety because the driving
direction is out of view, stop driving and check if it is safe
in the travelling direction. Use a guide person if
necessary depending on the work site situation.,
• The whole lever stand (7) can be folded. To start
travelling, pull up the lock lever (6) before erecting the
entire lever stand (7) forward to the "Travelling Control
Position", then fit the lock lever (6) into the guide groove.
[PREPARATION BEFORE STARTING MOVING]
[1] MOVING FORWARD
Operate the left and right travelling levers at the same time.
• Push the left and right travelling levers slowly forward to move
forward.
[2] MOVING BACKWARD
Operate the left and right travelling levers at the same time.
• Pull the left and right travelling levers slowly toward you to move
backward.