MADRIX LUNA 4, Руководство пользователя

Страница: 17 / 115

[Part 2] Device Configuration
//17
www.madrix.com
MADRIX LUNA User Manual
§
Valid values range from 1 to 32768.
Send Full Frames - Activates that always 512 channels will be sent out.
§
512 channels are sent per frame even if the data that is received by LUNA
includes less than 512 channels for this port and universe.
§
LUNA automatically sends values of 0 on channels that are not used.
§
Art-Net Broadcast Mode - Sends Art-Net data to all IP addresses in the
network.
§
Art-Net Unicast Mode - Sends Art-Net data only to one recipient, e.g. your
computer that runs MADRIX 5. Enter the IP address of your receiver here.
§
Use sACN Multicast Mode - Use it to specify data to be sent out via
Streaming ACN to IP address 293.255.1.0
Special Commands Reboot - Reboot System - Restarts the device completely. [The website will
automatically be reloaded after a few seconds.]
Reset - Reset To Factory Default Settings - Restores the original settings of
the device. [Since this may change back the IP address to the original setting, the
website will automatically be reloaded after a few seconds and you will automatically
be redirected to the correct website and IP address.]
Device Information This section displays various details about the device, including:
§
Model [The device type.]
§
IP Address [The current IP address.]
§
MAC Address [A permanent, unique address.]
§
Serial Number
§
Firmware [The current firmware version.]
§
Bootloader [The current bootloader version.]
§
Hardware [The hardware revision.]
§
Ethernet [The current status of the network connection.]