MADRIX LUNA 4, Руководство пользователя

Страница: 30 / 115

[Part 3] MADRIX 5 Software
//30
www.madrix.com
MADRIX LUNA User Manual
10] Sync Mode
MADRIX LUNA can use the special sync mode of Art-Net.
§
Large LED projects require dependable data distribution. The MADRIX 5 Software and LUNA hardware allow you
to synchronize data output for all 4/8/16 DMX ports and even across multiple LUNA devices to get an optimal
image on the LEDs.
§
When Art-Net sync mode is activated, MADRIX 5 and MADRIX LUNA will automatically handle the synchronization
of data.
Art-Net Sync Mode is highly recommended for MADRIX LUNA!
ArtSync - Allows you to activate or deactivate the usage of synchronization
commands/packages for Art-Net.
- Your Art-Net devices need to support this feature in order for it to work correctly.
- All MADRIX hardware Art-Net nodes support ArtSync.
- Sync packages will be sent to all network cards for which corresponding Art-Net
nodes are created in the MADRIX 5 Software.
In addition, you can choose between Post-Sync [default] and Pre-Sync . By default,
the sync data is sent after the main DMX/Art-Net data. Pre-Sync would send it before
the main DMX/Art-Net data.
§
Before activating sync, make sure that all activated Art-Net devices are
available in your network! Else, the frame rate of Art-Net might drop. If
you are not sure, do not enable any sync mode.
Additional Art-Net Device Settings
It is very important to set up the correct settings for your devices!