MADRIX LUNA 4, Руководство пользователя

Страница: 34 / 115

[Part 3] MADRIX 5 Software
//34
www.madrix.com
MADRIX LUNA User Manual
1] Initial Configuration
§
Connect your LED controllers or fixtures to the XLR ports of MADRIX LUNA [DMX 1 - 4/8/16].
§
Connect MADRIX LUNA to power.
[Please see safety instructions in the MADRIX LUNA Technical Manual & Quick Start Guide!]
§
Connect MADRIX LUNA to your computer using network cabling.
§
It is highly recommended to only use Gigabit Ethernet network components [network card, switches, etc.].
§
Set up the corresponding settings in the »
Configuration Using A Web Browser
2] Windows Network Settings
§
MADRIX 5 automatically sets up Streaming ACN network settings for you.
[MADRIX 5 supports multicast Streaming ACN. Data is automatically sent to all corresponding sACN devices in the
network. Unicast is also supported.]
§
You only need a computer with a network card and a valid IP address.
§
You do not have to change the IP address settings in Windows for Streaming ACN!
§
The IP address range for sACN devices is 239.255.X.X according to the Streaming ACN
specifications. MADRIX LUNA automatically works this way.
§
Make sure that your Firewall does not block data of the 239.255.X.X IP address range!
§
Check the settings of the Windows Firewall.
§
Learn more »
Tips [Microsoft Windows / Networks / USB]
3] Fixture Patching In MADRIX 5
§
Start MADRIX 5.
§
Configure the virtual LED matrix using the Matrix Generator or Patch Editor.