MADRIX LUNA 4, Руководство пользователя

Страница: 22 / 115

[Part 3] MADRIX 5 Software
//22
www.madrix.com
MADRIX LUNA User Manual
DMX-OUT Via Ethernet Network [Art-Net]
You can connect the LUNA via Ethernet network to the network card of your computer that runs the MADRIX 5
Software. Data is sent to the LUNA via network [Ethernet] and distributed to the XLR output ports [DMX 1 - 4/8/16].
1] Initial Configuration
§
Connect your LED controllers or fixtures to the XLR ports of MADRIX LUNA [DMX 1 - 4/8/16].
§
Connect MADRIX LUNA to power.
[Please see safety instructions in the MADRIX LUNA Technical Manual & Quick Start Guide!]
§
Connect MADRIX LUNA to your computer using network cabling.
§
It is highly recommended to only use Gigabit Ethernet network components [network card, switches, etc.].
§
Set up the corresponding settings in the »
Configuration Using A Web Browser
2] Windows Network Settings
Art-Net is a network-based protocol. MADRIX 5 will use the network card of your computer to send data.
§
It is required to set up the correct network settings in Windows, first.
§
You must use these IP address and Subnet mask settings. Otherwise, Art-Net might not work!
§
The IP addresses of your computer and your MADRIX LUNA devices need to be different.
§
Set up an individual IP address in the following IP address range:
- 2.0.0.1 ... 2.255.255.254 or
- 10.0.0.1 ... 10.255.255.254
§
Set up the corresponding Subnet mask
- 255.0.0.0