MADRIX LUNA 4, Руководство пользователя

Страница: 29 / 115

[Part 3] MADRIX 5 Software
//29
www.madrix.com
MADRIX LUNA User Manual
§
Set up the frame time for your device.
- Right Mouse Click or Left Mouse Double-Click on the column ms / FPS and enter the required
number.
- The frame time [in milliseconds; ms] affects the frame rate. The frame rate specifies how fast data is sent to
the device or received from it [in Frames Per Second; FPS].
- Increase the frame time in order to decrease the frame rate [e.g., 40 ms = 25 FPS].
- Decrease the frame time in order to increase the frame rate [e.g., 20 ms = 50 FPS].
- The default value is 30 ms / 33.3 FPS.
- Some LED fixtures might have problems with a low frame time / high frame rate. Then, it is
recommended to increase the frame time / decrease the frame rate.
§
[When using Art-Net, the Frame Time [ms] can be individually set for each port. But it cannot be set individually
for each port, when Sync Mode is activated. Learn more below.]
9] Optimized Frames Or Full Frames
§
Make sure that your device is still selected under Preferences > Device Manager... > DMX Devices
§
Choose how to send data.
- Right Mouse Click or Left Mouse Double-Click on the column Frames to choose between
Optimized and Full
- Per DMX512 standard, MADRIX 5 only sends the number of DMX channels that is configured [optimized
frames]. For example, if you are using 312 DMX channels on a DMX universe, only 312 DMX channels will be
sent with every single frame on this universe.
- Activate Full Frames if devices should always send full frames on a particular universe, instead of optimized
frames. Sending full frames means that always the full 512 DMX channels of a DMX universe will be sent with
every frame [even when you are using less than 512 channels on the universe].
- Activating
Full Frames
is recommended if problems with the data output of your devices occur.
§
In addition, you can activate Full Frames for the device and each MADRIX LUNA output port separately.