6
Unpacking and Placement
Unpacking the Nº39
Unpack your Nº39 CD Processor and remove all accessories from the carton.
Important!
Keep all packing materials for future transport of your Nº39.
Shipping your new component in anything other than its
purpose-designed packing material may result in damage
that is not covered by the warranty.
Included with your new Mark Levinson CD processor is a pair of knit, white
gloves designed to assist you in the initial unpacking and placement of your new
purchase. Please accept them as a token of our appreciation for having purchased
one of our products.
Remove the Transport Screw
Place the Nº39 CD Processor upside-down on a soft, clean surface. Remove the
transport screw from the bottom of the unit and save it with the packing materi-
als for future use.
transport
screw
Warning!
The transport screw must be removed before operating the
Nº39, since it immobilizes the transport mechanism during
shipping to prevent damage. This screw must also be
replaced before shipping the unit.
Placement of the Nº39
The Nº37 should be placed close to your digital audio processor, thus keeping
interconnect cabling reasonably short. It may be placed on a shelf or in a cabinet
where it is convenient to operate, but should not be rack mounted, so as to leave
access to the rear panel power switch.
The Nº37 is designed for continuous operation—hence the standby button on
the front panel rather than a power button. However, a rear-panel power switch is
provided for your convenience should you want to disconnect the unit from the
AC mains (as when taking a vacation, for example).
Drawings are included in this manual to facilitate special installations and custom
cabinetry (see
Dimensions
).
Содержание Mark Levinson 39
Страница 1: ...Madrigal Audio Laboratories Inc Operating Manual Mark Levinson Nº39 CD Processor ...
Страница 54: ...54 Installation Notes ...
Страница 55: ...55 Installation Notes ...