Madrigal Audio Mark Levinson 39 Скачать руководство пользователя страница 36

Страница: 36 / 56

Assembling a Playlist

To assemble a new playlist:

1. Load a CD, and wait for the display to show the number of tracks

and their total playing time.

2. Make sure that the Nº39 is in the programming mode by clicking

the

mode

button until you see

PROGRAM

in the display.

3. Using the

next

and

previous

buttons (or the numbered buttons on

the Remote Control), select the first track in your playlist.

4. Add the first selection to your playlist by pressing

mode +

. The

display will acknowledge your command by showing a

preced-

ing the track number on the display to indicate that it has been
added to the playlist.

5. Assemble the rest of your playlist by repeating steps 2 and 3. Make

sure to press

mode +

after each selection.

Programming by Omission

If you want to play

most

of a CD, and just “omit” a few tracks, you may want to

use this shortcut:

1. Load a CD, and wait for the display to show the number of tracks

and their total playing time.

2. Make sure that the Nº39 is in the programming mode by clicking

the

mode

button until you see

PROGRAM

in the display.

3. Using the

next

and

previous

buttons (or the numbered buttons on

the Remote Control), select the first track you want to

eliminate

from your program.

4. “Omit” the track by pressing

mode –

. This action deletes the track

from the current playlist, indicated by the

PRG–

in the display next

to the track number.

5. Using

next

and

previous

, move to any other tracks you would pre-

fer to skip, pressing

mode –

to eliminate each track from the playl-

ist. Once you are in the program mode, a

will illuminate to indi-

cate a track is in the playlist, and extinguish for any track omitted
from the playlist.

Saving a Playlist

Once you have created the playlist you want for a particular disc, you may either
use it as a temporary playlist (using it only for that one occasion), or save it as
the default playlist for that disc. To save a playlist:

1. When you’ve finished adding selections, you can save the new

playlist by

pressing and holding

the

mode +

button.

2. The Nº39 will confirm that your playlist is saved by displaying

SAVED

briefly (or

REVISED

if you changed an existing playlist).

Reviewing a Playlist

To review your playlist before playing it:

1. Load a CD for which you’ve already saved a playlist (the letter

will appear preceding the track number on the display); or load an
unprogrammed CD, then assemble and save a playlist.

2. Make sure that the Nº39 is in the programming mode by clicking

the

mode

button until you see

PROGRAM

in the display.

3. Without selecting any particular track (while the playlist’s total

number of tracks and total playing time are displayed), press

mode

. The display will show the first selection in your playlist. For ex-

ample, if track 3 is the first selection in your program, the display
would show

P03

> 1st

Содержание Mark Levinson 39

























































Результаты поиска

Содержание Mark Levinson 39

Отзывы:

Madrigal Audio Mark Levinson 39, Руководство по эксплуатации, Страница: 36 / 56

Результаты поиска

Содержание Mark Levinson 39

Отзывы: