Madrigal Audio Mark Levinson 39 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 56

Madrigal Audio Mark Levinson 39 Скачать руководство пользователя страница 41

41

Nº38S Preamplifier, and the Nº33 and 300-series power amplifiers).

Note:

To take advantage of linked functions, you must connect the
Nº39 to the other components via their communication ports.
(See Rear Panel and Setup and Installation.)

Silent/Audible Cueing

The Nº39 also gives you the option of hearing a reduced-volume scan of the
program material during fast forward or rewind, or of having the scan be silent.
For some, the audible cueing helps identify the portion of the track they seek;
others find the broken-up bits of music disconcerting and prefer silence.

Balance Control

If you have engaged the volume control circuitry by setting the

+ VARIABLE

menu

item, then you will also see a balance control within the setup menu, indicated
by arrows pointing in both directions (when at the neutral position). Pressing the

mode +

key will move the balance and the image to the right, indicated by a

number of decibels and the arrow pointing to the right; pressing the

mode –

key

will reverse this process. (This menu does not appear in the

– FIXED

volume

mode, since it would not apply.)

Mute Control

Similarly, a user-adjustable mute control is available when the volume control cir-
cuitry has been engaged. It offers a range of –3 to –41 decibels of muting in re-
sponse to the remote control’s mute button being pushed. The factory default is
-20 dB.

Locked Volume

Lastly, if (and only if) the volume control circuitry is engaged, you have the op-
tion of setting a maximum volume beyond which the Nº39 will not go. This is
particularly helpful if you have a combination of high sensitivity speakers and
high senstivity power amplifiers, which might make the normal maximum vol-
ume setting on the Nº39 dangerously loud for your particular system. (It was de-
signed to be able to drive even relatively insensitive systems.) Alternatively, it can
serve as a helpful “party control” to guard against indiscrete guests becoming
somewhat overzealous in the heat of the moment.…

If you want to set a maximum allowable volume, select your chosen volume set-
ting and then toggle from UNLOCKED to LOCKED.

LINK Menu items:

Standby link

This feature links the standby modes of the various Mark Levinson Linked com-
ponents. For example:

• If CD processor, preamplifier and power amplifier(s) are in standby

mode, pressing the CD processor’s

standby

button will take all

four components out of standby mode (making them ready to
use).

• If CD processor, preamplifier and power amplifier(s) are “on” (not

in standby mode), pressing the Nº39’s

standby

button will place

only the CD processor in standby mode (presuming that you may

«
...
39
40
41
42
43
...
»

Содержание Mark Levinson 39

























































Отзывы:

Нет отзывов