Madrigal Audio Mark Levinson 39, Руководство по эксплуатации, Страница: 43 / 56

43
of the two auxiliary inputs and not the other, setting the unused input to “N.U.”
will change the input selection process to a simple toggle between the two used
inputs. Labelling both auxiliary inputs “N.U.” will effectively disable the input se-
lection process on the Nº39, although it will still control the analog inputs of a
Linked preamplifier..
Changing Link Options
The following procedure will guide you through changing your Link options,
should you decide you would like something other than the factory’s default set-
tings. (Note that most people are perfectly satisfied with the default settings, and
never need to concern themselves with this section.)
1. Make sure that the
main power
switch is set to the “on” (“ | ”) posi-
tion and the unit is not in “standby.”
2. Press
and hold
the front-panel
mode
button until
SETUP
followed
by
SOUND
appears on the display. Release the
mode
button; subse-
quent “clicks” of the
mode
button will cycle through each of your
Nº39’s main menus, in this order:
SOUND
LINKS
AUX IN’s
Continued clicks on the
mode
button will return you to the begin-
ning of the list, in case you accidentally pass the option you want
to change.
3. When the display shows the menu you want to access,
press and
hold
the
mode
button again. Subsequent clicks of the
mode
button will cycle through the various items
within
that menu.
4. When an item you wish to change is in the display, use the
mode +
and
mode –
keys (either on the front panel or on the re-
mote control) to change the setting.
5. Repeat step 4 for each setting you want to change.
6. When you have finished, press
and hold
the
mode
button again to
confirm your change(s). The display will return to the original
three main menus.
Once saved, your link settings remain in memory when you place the Nº39 into
standby
, when you turn off the
main power
switch — even if AC power is inter-
rupted.
Sleep Timer
The Nº39 also may be set to automatically enter standby after a predefined pe-
riod. As shipped from the factory, its standby function is manual (that is, it only
enters or leaves standby when told to do so by the user).
This feature is similar to a “sleep timer” on a clock radio. If playing a CD, for ex-
ample, the Nº39 will enter standby automatically after the user-selected period of
time. To change between manual and timed/automatic standby:
1. Press
and hold
the
standby
button until the display reads
MANUAL
.
2. Release the
standby
button and then use the previous and next
buttons to either advance or reduce the amount of time you want
to transpire between the last activity of the Nº39 and its going into
standby. You may select any number of minutes between 1-120. You
may restore normal, manual operation by pressing previous to go
“below” 1 minute, into MANUAL standby operation.
3. Allow the Nº39 to timeout (returning the display to its normal op-
eration).