Madill 1200, Руководство пользователя

Страница: 8 / 45

MADILL 1200
WELDING PRECAUTIONS
To prevent damage to the electronic control systems on this machine, the following steps
must be taken before welding:
1. Battery - disconnect the negative terminal.
Battery Tray located at rear compartment of cab
2. Control Modules - disconnect the Fan Control Module, Pump Control Module and
Engine Control Module as shown in before and after picture.
Before disconnecting Control Modules After disconnecting Control Modules
DO NOT weld on the engine, or on any components bolted directly to the engine. Dis-
mount the components before welding if any engine-mounted items require modifica-
tions.
Attach the ground clamp no more than two feet away from the part being welded, no mat-
ter where on the machine the weld is being made. NEVER attach the ground clamp to
any Electronic Control Module
Section One
Page 2e