Madill 1200, Руководство пользователя

Страница: 18 / 45

MADILL 1200
GAUGES AND WARNING LIGHTS
ENGINE COOLANT TEMPERATURE
Gauge provided to monitor engine coolant temperature. Normal operating range is 180-
190 deg.F. (82-88 deg.C.)
ENGINE OIL PRESSURE
Gauge provided to monitor engine oil pressure. Oil pressure must register immediately
after engine has started. At low idle minimum oil pressure should be __ psi. At high idle
minimum oil pressure should be __ psi. Check the engine oil level if pressure is not suffi-
cient. “Check Engine” light indicates when engine oil pressure is below 5 psi.
HYDRAULIC OIL TEMPERATURE & LEVEL
Gauge is provided to monitor hydraulic reservoir temperature. Normal operating range is
140-160 deg.F. (60-70 deg.C.). DO NOT operate machine if temperature exceeds 200
deg.F. (94 deg.C.). Check hydraulic reservoir for low oil level. Next check oil cooler for
clogging. If high temperature persists check for excessive relief valve operation or
hydraulic circuit malfunction. Warning light indicates low hydraulic reservoir oil level.
VOLTMETER
This is part of “PowerView” display.
FUEL LEVEL GAUGE
Gauge is provided to monitor fuel tank level.
HOUR METER
This is part of ” PowerView” display.
HYDRAULIC FILTER
Warning light indicates that the in-tank filter is nearing by-pass operation. Light indicates
at 20 psi, filter by-passes at 25 psi. Light may indicate under cold start-up conditions
due to high viscosity. If the light indicates when the hydraulic oil has reached operating
temperature the filter elements should be replaced.
LOW HYDRAULIC OIL
The warning light and buzzer are activated when low hydraulic reservoir oil level is
detected.
CHECK ENGINE
The check engine light provides critical operator messages. These messages require
immediate and decisive operator response. The check engine light is also used to flash
out diagnostic fault codes. Additional diagnostic information is available on the Power-
View reader.
Page 8a
Section One
RETURN TO INDEX