Madill 1200, Руководство пользователя

Страница: 7 / 45

MADILL 1200
MINIMIZE HAIRLINE SCRATCHES
Scratches and minor abrasions can be minimized by using a mild automobile polish.
Three such products that tend to polish and fill scratches are Johnson Paste Wax, Novus
Plastic Polish No.1 & No.2, Novus Inc. Minneapolis, MN and Micor Glaze plastic polish
(M.G.M.10), Mirror Bright Polish Co., Pasadena, CA. It is suggested that a test be made
on a sample of LEXAN sheet with the product selected and that the polish manufac-
turer’s instructions be followed.
SOME IMPORTANT “DON’T’S”
- DO NOT use abrasive or highly alkaline cleaners on LEXAN sheet products.
- NEVER scrape LEXAN sheet products with squeegees, razor blades or other sharp
instruments.
- Benzene, gasoline, acetone or carbon tetrachloride should NEVER be used on LEXAN
sheet products.
- DO NOT clean LEXAN sheet products in hot sun or at elevated temperatures.
- DO NOT use butyl cellosolve on XL-1 or TC-2.
COMPATIBLE CLEANERS FOR LEXAN SHEET PRODUCTS
The following cleaning agents have been found compatible with LEXAN sheet, LEXAN
XL sheet and LEXAN THERMOCLEAR sheet. The manufacturer’s recommendations
and instructions should be followed.
- JOY - Top Job
- Freon T.F. - VM&P Grade Naphtha
- Palmolive Liquid - Windex with Ammonia D
MARGUARD SHEET CLEANING INSTRUCTIONS
Because of this material’s highly mar-and UV resistant coating, avoid the use of abrasive
cleaners and/or cleaning implements that may mar or gouge the coating.
Graffiti Removal for MARGUARD Sheet
- Butyl cellosolve works well for removal of paints, marking pen inks, lipstick, etc.
- Masking tape, adhesive tape or lint removal tools work well for lifting off old, weathered
paints.
- To remove labels, stickers, etc., the use of kerosene or VM&P naphtha is generally
effective. When the solvent will not penetrate sticker material, apply heat (hair dryer) to
soften the adhesive and promote removal. GASOLINE SHOULD NOT BE USED.
JOB SITE PRECAUTIONS
New construction and renovations frequently require that the glazing and surrounding
sash and wall finish can be cleaned of any excess mortar, paint, sealant, primers or other
construction compounds. Only recommended cleaners should be used to clean LEXAN
sheet. Contact with harsh solvents such as methyl ethyl ketone (MEK) or muriatic acid
can result in surface degradation and possible crazing of LEXAN sheet.
Section One
Page 2d