IMPLEMENTATION
23 / 30
3.2.1.3.Core identification and continuity in short circuit
mode
Mode usable in all cases
Connect the loop for core identification in short circuit to the
receiver, press the « measurement » button, the
“
Short
circuit identification and S1 continuity
” LED switches on.
Put the loop around the core to identify, and close it.
Press the « measurement » button, the « end of
measurement » turns off.
Wait for the result (3 seconds), the « end of measurement »
turns on.
If the core is identified, the L1, L2 or L3 and the
YES
LED
illuminates.
Repeat the operation to identify the other cores.
The receiver designates the core within the loop.
