IMPLEMENTATION
22 / 30
3.2.1.2.Core identification in open circuit and continuity
to S1 Transmitter mode
Mode usable in all cases.
Connect the red probes to the receiver, press the «
measurement » button, the “
Open circuit identification
and S1 continuity
” LED illuminates.
The cable being cut, probe any 2 cores of the 3.
Press the « measurement » button, the « end of
measurement » LED turns off.
Wait for the result (3 seconds), the « end of measurement »
LED turns on.
The result will depend on the probed cores and on the
cable extremity they are connected to :
If the probe is connected towards S1, the LED “YES”
for the S1 continuity turns on.
If the phase is identified, the
L1
,
L2
or
L3
LED
illuminates.
Repeat the operation to identify the other cores.
The receiver designates the free conductor.
