Pagina 46 di 93 Codice doc. 1080622209
Versione: 2022_02_21
Salvo modifiche tecniche
2.2 Retrofitting S3C with an additional communication interface
To our calculator further communication interfaces can be added later.
Open the calculator by pulling the clamping bracket at the upper housing´s leading edge up.
Plug the interface module on the right side of the PC board. If there are module cables you have to loosen the needed
number of cable glands and to glide them over the cables. Remove the blind plugs from the cable gland openings and
feed the cables into the calculator.
Protect the calculator against unauthorized opening using one of the numbered adhesive seals enclosed to the
modules (stick it upon the seal destroyed). The added bar code label can be used for the purpose of documentation.
