21
IT
EN
FR
ES
XV(F)-1-3-6
Madas Technical Manual
- 1|1.5cX - REV. 1 of 10
th
Sep 2020
9.0 - RATING PLATE DATA
The user is obliged to keep the marking of the valve clearly visible: any
coatings or paintwork performed on the product that make the valve
unidentifiable are not to be attributed to the manufacturer.
The rating plate data (see example provided here) includes the following:
• Manufacturer’s name/logo and address (possible distributor name/logo)
• Mod.:
= device name/model followed
by the connection diameter
• CE-51CR4682
= certification pin number
• Cl. A
= Seal strength in counterflow at 150 mbar in
accordance with EN 161
• Gr. 2
= Mechanical resistance group 2 in accordance with EN 161
• EN 161
= Product reference regulation
• P.max
= Maximum pressure at which product operation is guaranteed
• PS
= Allowable maximum pressure
• IP....
= Protection rating
• 230V....
= Power supply voltage, frequency (if Vac), followed by electrical absorption
• Example of electrical absorption indication: 270/70 VA indicates 270 VA at start, 70 VA at steady state
• TS
= Temperature range within which product operation is guaranteed
•
= Conformity with Regulation (EU) 2016/426 followed by Notified Body No.
•
(if it is present) = Conformity with PED Dir. followed by Notified Body No.
•
= In compliance with ATEX followed by the protection mode
(complete protection mode indicated on coil and CPI switch)
• year
= Year of manufacture
• Lot
= Product serial number (see explanation below)
• U1802
= Lot issued in year 2018 in the 2nd week
• 1065
= progressive job order number for the indicated year
• 00001
= progressive number referring to the quantity of the lot
0051
0497
Mod: XV-1 DN 100
CE- 51CR4682 CI.A GR.2 EN 161 P. max=PS=1 bar
IP65 – 230 V/50-60 Hz 270/70 VA TS: -20+60 °C
II 3G
II 3D
year: 2018 Lot:U1802 1065/00001
Compliance table
P. max 0.5 bar
P. max 1 bar
P. max 3 - 6 bar
DN 65 - DN 80
DN 1
00
DN 1
25 - DN 1
50
DN 65 - DN 80
DN 1
00
DN 1
25 - DN 1
50
DN 32 - DN 40 - DN 50
DN 32 FL - DN 40 FL - DN 50 FL
DN 65 - DN 80
DN 1
00
DN 1
25 - DN 1
50
Regulation (EU)
2016/426
*
*
*
PED Directive
2014/68/EU
-
-
-
* Component designed for industrial use in industrial sites.