TH8750150
20-02-2015
MAD Disc Aligner
en
DA8700
26
1. Rotate the Drive Adapter in horizontal position.
2. Align the lathe drive unit with the hub of the rotor.
3. Position the Drive Unit to the correct height, by grasping the hand grip on the
drive unit and sliding the unit up or down along the mounting post. See Fig. 19.
4. Slide the drive yoke onto the drive adapter, leaving a 5 mm (0.2 inch) space, Fig.
58(A). Drive yoke must align with the center of the hub.
5. Lock the caster wheels to lock the stand in place, Fig. 58(B).
6. Check that the brake rotor is free to rotate, with no parts dragging or blocking.
7.
NOTE
: The drive shaft and brake rotor on the other side of the vehicle
could start turning when the lathe drive unit is turned on.
Fig. 58
A
B
B
6.
Positioning DU8610 Drive Unit
Positioning DU8610 Drive Unit
5 mm
0.2 in
