TH8750150
20-02-2015
MAD Disc Aligner
DA8700
en
31
11.1 Tips
-
While assembling the Lathe, ensure that the spacing between the brake caliper
ears and Lathe is even both above and below.
-
Rotate or change the bits frequently to ensure a fresh, sharp cutting edge.
-
Prior to machining, verify that the bits will be able to machine the entire surface of
the brake rotor.
-
A special brochure detailing various options for your lathe is available through
your supplier.
11.
Tips / Spare Parts
11.2 Spare parts
-
Replacement parts can be ordered through your supplier. When ordering parts,
refer to the parts list included with the lathe. Please provide the lathe serial num-
ber when ordering.
-
Store this instruction manual and parts list in the storage box of the Lathe.
Tips / Spare Parts
