Mad Dogg Athletics spinner SPORT, Руководство пользователя

Страница: 12 / 16

10
luBricaTing The chain
1)
Locate the chain guard on the front right side of your
Spinner Sport.
2)
Using a phillips head screwdriver, remove the outer chain guard
cover. This will expose the chain.
3)
Use a chain lube such as SPINTECH® Silicone Fitness Lube or
other oil-based lubricant with a spray nozzle.
Do not
use a wax-
based lubricant.
4)
When spraying the lubricant onto the chain, cover the floor under the
bike and take care not to allow the lubricant to drip onto the floor.
5)
Lock the brake by turning the resistance knob clockwise. With
the brake locked up, spray the lube onto the chain. Loosen
the brake and rotate the chain carefully and slowly, by hand,
approximately a quarter turn. Then stop it, tighten the brake
again and spray lube onto the next portion of the chain. Repeat
the above steps a total of six times to lubricate the entire chain.
6) Carefully replace the chain guard. Your Spinner Sport is now
ready for testing.
» SPINTECH® lubricants, polish and grease are available
at www.spinning.com.
© 2008 Mad Dogg Athletics, Inc. All rights reserved.
Spin®, Spinning®, Spinner®, Spin Fitness® and the Spinning logo are registered trademarks of Mad Dogg Athletics, Inc.
During heavy use of your Spinner® Sport, it may become necessary
to lubricate your chain to reduce chain associated noises. If you
have any questions regarding lubricating your chain, please contact
customer service at
800-847-SPIN (7746)
for assistance.