Mad Dogg Athletics spinner SPORT, Руководство пользователя

Страница: 8 / 16

6
Bike assemBly
2
3
1) UNPACK tHE CARtON
Open the shipping carton and remove all parts. Make sure the following parts are
included and that no damage has occurred during shipping.
2) AttACH tHE stABILIzING BARs
Using the allen wrench supplied, remove the
MDF boards (used to protect the bottom of
the frame during shipping), by unscrewing and
removing phillip head screws and washers.
Lift the bike frame, remove MDF boards and
discard boards, screws and washers. Remove
button head screws and washers from the front
stabilizer bar (with transportation wheels). Set
screws and washers aside. Lift front of bike.
Place the front stabilizer bar under the frame.
Line up the holes in the stabilizer bar with the
holes in the frame. Secure the front bar to
the frame using the button head screws and
washers. Tighten the screws securely. Repeat
process for rear stabilizer bar.
3) INstALL tHE sEAt
While holding the seat post pop-pin, slide the
seat post into the seat tube. Release the pop-pin.
Adjust the seat post to make sure the pop-pin is
engaged. Tight the seat post pop-pin securely.
Unscrew, pull out and hold the seat slider pop-
pin. Slide the seat slider all the way into the seat
tube. Release the seat slider pop-pin. Adjust the
seat slider to make sure the pop-pin is engaged.
Tight the seat slider pop-pin securely.
» Bike frame with flywheel
» Front stabilizer bar with transportation
wheels
» Rear stabilizer bar
» Handlebars
» Pedals (set of two)
» Seat slider and seat
» Seat post
» Water bottle
» Tools: 1 allen wrench and 1 multi- wrench
» Owners Manual
» Guide to Ride
» Spinning® 4 DVD set
Take time now to enter your Spinner® bike serial number in the space below (serial number is
located on the bottom crossbar). If parts are missing, or if you have any assembly questions,
please contact customer service at 800-847-SPIN (7746).
Serial No. : __________________________________________________________