995086
–
Rev B
Page 17 of 32
Refitting / Replacement
Refitting is a reversal of the removal process noting the following points:
•
Ensure to place the batteries back into the brackets in the correct orientation. (the cable should be at
the PCB end facing outwards).
•
Ensure that the battery A and motor A are on the same face of the chassis. Same applies to battery B
and motor B. Battery B does NOT have a suppressor on the cable.
•
Ensure the Velcro is reattached correctly.
8 . 4
PCB
This section will cover the details of how to remove, refit and replace the PCB.
Removal
1.
Remove the side covers from the portable lift. (Refer to section 8.1)
2.
Disconnect the power leads from the PCB.
3.
Remove the remaining connections from the PCB ports. There is no correct order to disconnect.
•
Motor A
•
Motor B
•
Limit Switch
•
Handset Port
1
2
3
4
