995086
–
Rev B
Page 14 of 32
8 . 2
Top/Bottom Covers
8 . 2 . 1
Top Cover
This section will cover the details of how to remove, refit and replace the portable lifts top cover.
Removal
1.
Remove the side covers from the portable lift. (Refer to section 8.1)
2.
Remove the PCB from the portable lift. (Refer to section 8.4)
3.
Remove the top QRS Hook from the chassis. (Refer to section 8.13)
4.
Remove the QRS Hook from the lift tape. (Refer to section 8.13)
5.
Using long nose pliers, remove the bung that secures the cover to the chassis by pressing the retaining
clips inwards.
6.
Pull the top cover away from the chassis and feed the lift tape through the slot to remove.
Refitting / Replacement
Refitting is a reversal of the removal process noting the following points:
•
Make sure the cover slot is fed through the lift tape in the correct direction.
•
Make sure to align the cover with the bung hole.
•
Attach the bung by pressing the bung into the hole.
