995086
–
Rev B
Page 22 of 32
8 . 7
Lift Hub (Spool)
This section will cover the details of how to remove, refit and replace the Lift Tape.
Removal
1.
Remove the side covers from the portable lift. (Refer to section 8.1)
2.
Remove the PCB from the portable lift. (Refer to section 8.4)
3.
Remove the top cover from the portable lift. (Refer to section 8.2)
4.
Remove the lift motors from the portable lift. (Refer to section 8.5)
5.
Remove the motor shafts from the portable lift. (Refer to section 8.10)
6.
Remove the lift tape from the portable lift (Refer to section 8.6)
7.
Using a 4mm Allen Key, remove the two overspeed screws from the chassis.
8.
Remove the strap pin from the chassis, this should already be loose from the lift tape removal. If not,
remove the 8mm e-clip.
9.
Slowly guide the hub out of the chassis. Be careful not to damage the teeth during removal.
