995086
–
Rev B
Page 15 of 32
8 . 2 . 2
Bottom Cover
This section will cover the details of how to remove, refit and replace the portable lifts bottom cover.
Removal
1.
Remove the side covers from the portable lift. (Refer to section 8.1)
2.
Remove the PCB from the portable lift. (Refer to section 8.4)
3.
Remove the QRS Hook from the chassis. (Refer to section 8.13)
4.
Remove the handset cable port from the portable lift. (Refer to section 8.11)
5.
Pull the top cover away from the chassis to remove.
Refitting / Replacement
Refitting is a reversal of the removal process noting the following points:
•
Ensure the red pull cord is pulled through its designated slot.
•
Ensure that the handset port fits into its designated slot.
•
Ensure that the bottom cover is flush up against the bottom of the chassis.
